If you haven’t descaled in a few months, use your bottle of descaling solution, and refer to our guide on how to descale a Keurig to complete the process. Now your machine is in Descale Mode, and it expects to be descaled.If your descale light was flashing, it should turn solid. The machine will power up, and the brew button should start flashing. Activate the Descale Mode by holding down your machine’s 8-ounce and 12-ounce buttons at the same time for three seconds.Plug your machine back in, but don’t turn it on quite yet.It will catch the water or used descaling mixture. Put your coffee mug on the tray where it usually goes.Take out the water filter and any coffee pods left inside.Turn your Keurig off, and pull its plug.1 Bottle of Keurig descaling solution (optional).If so, you’ll need to activate the Descale Mode to let the machine know that it is officially being descaled. If you’ve already tried descaling your machine, but the light still won’t turn off, you may have a model with an official Descale Mode. If you have a lot of build-up, you can descale your Keurig’s using their descaling solution and our descaling guide to get rid of it quickly. Limescale build-up is the most common reason the Keurig descale light turns on. This chalky gunk is known as limescale, and it comes from trace minerals in your hard water supply. You can look for problem signs like sediment sloshing around at the bottom of the water in your reservoir or layers of white residue accumulating around the sides. They only know that the flow of water has slowed down too much for the brewing process to work properly. Keurig machines can’t tell you what’s clogging their innards. This gunk is usually some kind of mineral deposit left behind by hard water, but it can also be loose coffee grounds, dirt, air bubbles, or other tiny particles. The descale indicator lights up on your Keurig whenever too much gunk builds up inside its tubes and hoses. In Summary Why Is The Descale Light On And Won’t Brew?
0 Comments
Leave a Reply. |